1,151,329 Reviews Analysed
460 Review Articles Examined

After exploring an incredibly large number of articles and reviews by our brilliant AI & Machine Learning systems; and deep refining, inspection and infiltration by our competent high-tech experts, the golden shortlist for the Best Spectrum Analyzers (2021) is finally compiled.

The ultimate guide on Best Spectrum Analyzers produced using Deep Learning and Artificial Intelligence technology

Exclusively at AGR reviews

In order to obtain the Best Spectrum Analyzers (2021), our dynamic platforms and gurus have taken many elements into account such as product usability, features that meet consumers needs and give customer satisfaction, deficiency-free, standards conformance, affordability, robustness, user-friendly design, quality conformance to needs and good practises, safety, actual buyer satisfaction and many others. It is worth to mention that each user has different requirements so please use the list below as a guide and not as a gospel. Nonetheless, in the shortlist below you can undoubtedly find the overall best ones despite your needs.

Our intelligent platforms and qualified high-tech gurus work hard to provide you with the best product choices. We firmly believe that that our review evaluation can help you simplify your purchase decision and choose among the absolute Best Spectrum Analyzers (2021).

Best Spectrum Analyzers

Best Choice No. 1
Siglent Technologies SSA3021X-TG Spectrum Analyzers,9 kHz to 2.1 GHz with Free Tracking Generator
  • All-Digital IF Technology
  • Frequency Range from 9 kHz up to 2.1 GHz
  • -161 dBm/Hz Displayed Average Noise Level (Typ.)
  • -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
  • 1 Hz Minimum Resolution Bandwidth (RBW)
SaleBest Choice No. 2
Portable TinySA Spectrum Analyzer,SEESII Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen Battery
  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
  • 【Package List】1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It’s very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
Best Choice No. 3
RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus – Slim
  • [Impressive frequency range] – Scan and diagnose any frequency starting in low frequency 50KHz up to high frequency 6.1GHz, with no gaps or limitations. Offering this wide operating range, it can detect all WiFi, cell stations and phones, IoT, HAM bands, Digital radio and TV, ISM bands, Drone links and pretty much all wireless technologies used in todays demanding communications world.
  • [Robust design and instant power up] – A fully armored metallic enclosure provides robust mechanical strength and the high quality baked varnished paint provides a unique glossy finish. The device is designed and manufactured to last many years of demanding usage in the field, with internal rechargeable Lithium battery for hours of continuous usage.
  • [Advanced features] – Included advanced high-resolution Spectrum Analyzer mode, WiFi Analyzer mode, Tracking SNA. Internal firmware is continuously updated with additional features and functions to improve the device capabilities.
  • [Free Computer software] – When connected to a Windows, Linux or Mac computer the analyzer can display advanced high resolution graphics, including Power Meter and Spectrum Analyzer real time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services.
  • [Tracking mode enabled] – When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas.
SaleBest Choice No. 4
Portable tinySA Spectrum Analyzer, AURSINC Hand Held Frequency Analyzer MF/HF/VHF UHF Input for 0.1MHZ-350MHz, UHF Input for 240MHz-960MHz, Signal Generator with 2.8 inch Touch Screen Battery
  • [2021 Upgraded Version: ESD Protection Diodes] Tinysa with latest firmware V3.0, the displayed version info is “ESD protected” meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range
  • [4 Input/Output Spec Modes] The input/output specification of the tinySA is split over the 4 modes: Low input mode, High input mode, Low output mode, High output mode. The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link
  • [PC Control] The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinySA are available. Both are able to capture the screen of the tinySA
Best Choice No. 5
TrueRTA Audio Spectrum Analyzer for Windows PCs, Level 2 Registration Code, Single User License
  • High-Resolution Real Time Analyzer
  • Low distortion Signal Generator
  • Dual Trace Oscilloscope
  • Digital Level Meter (millivolts, dB SPL, dBu)
  • Crest Factor Meter (dB, V/V)
Best Choice No. 6
Rigol DSA815-TG Tracking Generator Spectrum Analyzer
  • Spectrum Analyzer, 9kHz to 1.5GHz with preamplifier and tracking generator
  • 2012-2014 top selling unit
  • 9 kHz to 1.5 GHz Frequency Range
  • 1.5 GHz Tracking Generator (TG)
  • Multiple markers and marker table functionality
Best Choice No. 7
Portable tinySA Spectrum Analyzer – AURSINC Handheld Frequency Analyzer with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz with 2.8 inch Touchscreen
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes
  • [ESD Protection Diodes] Firmware V1.3-3 or later, the displayed version info is “ESD protected” meaning the diodes are installed which will be more stable and sensitive. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency range.
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer
  • [PC Control] The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinySA are available. Both are able to capture the screen of the tinySA
  • [New Package Content] 1x Tiny Spectrum Antenna Analyzer; 2x SMA Male to UHF Female Cables 60cm/2Ft ; 1x 2W 30db SMA Attenuator ( if you need other attenuations, please inform us there are 3db, 6db,10db, 20db SMA attenuators for you to choose)
Best Choice No. 8
TrueRTA Audio Spectrum Analyzer for Windows PCs, Level 4 Registration Code, Single User License
  • High-Resolution Real Time Analyzer
  • Low distortion Signal Generator
  • Dual Trace Oscilloscope
  • Digital Level Meter (millivolts, dB SPL, dBu)
  • Crest Factor Meter (dB, V/V)
Best Choice No. 9
OSCIUM WiPry 2500x: Wi-Fi Spectrum Analyzer, 2.4 & 5 GHz, Universal Platform Support (Including iOS, Android, PC, Mac), Portable, Advanced Reporting, No Software Subscription
  • 2.4 GHz and 5 GHz Spectrum Analyzer views all interference including ZigBee, Bluetooth, Baby Monitors, etc
  • Android, iOS, Mac, PC Supported
  • Scan and Troubleshoot Wi-Fi
  • SSID’s and RSSI
  • 802.11 and ZigBee Channel Guides
Best Choice No. 10
SDRGEEK TinySA Handheld Tiny Spectrum Analyzer 2.8 Inch Touching Display 100KHz-350MHz Screen Spectrum Analyzers Signal Generator with Battery
  • 【With Two Inputs】Spectrum analyzer with two inputs, fine quality MF/HF/VHF input for 0.1MHz-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6KHz and 640KHz.
  • 【MF/HF/VHF Input】Input step attenuator from 0dB to 31dB for the MF/HF/VHF input. Color display showing 290 scan points covering up to the full low or high frequency range.
  • 【Portable and Convenient】Rechargeable battery allowing a minimum of at least 2 hours portable use. Connected to a PC via USB it becomes a PC controlled spectrum analyzer.
  • 【Wide Application】When not used as spectrum analyzer it can be used as signal generator, MF/HF/VHF sinus output between 0.1MHz-350MHz, UHF square wave output between 240MHz-960MHz.
  • 【Package Included】1 * Spectrum Analyzer; 2 * SMA Cable and A Barrel Connector; 1 * Antenna with An SMA Connector; 1 * USB-C Cable; 1 * Touching Screen Paddle.

If you have found our review analysis useful, please do not hesitate to subscribe for more amazing reviews. Bear in mind that our subscribers benefit from special Amazon.com promo codes of up to 80% discount. That’s right, up to 80%! Do not miss them!.

You may also like…

Do not hesitate to share this review on Best Spectrum Analyzers. We have made this easier for you to spread the world.