2,432,315 Reviews Analysed
207 Review Articles Examined

After exploring an insanely large number of articles and reviews by our dynamic AI & ML tools; and detailed refining, examination and rectification by our skillful hi-tech experts, the golden shortlist for the Best Mechanical Spur Gears (2021) is ultimately drafted.

The ultimate guide on Best Mechanical Spur Gears produced using Deep Learning and Artificial Intelligence technology

Exclusively at AGR reviews

In order to obtain the Best Mechanical Spur Gears (2021), our brilliant platforms and experts have taken many elements into account such as product fitness for use, features that meet consumers needs and give customer satisfaction, deficiency-free, conformity of standards, affordability, robustness, user-oriented design, quality conformance to user requirements and regulations, health and safety, actual user satisfaction and lots of others. It is important to mention that each user has different needs so please use the below benchmarking as a guideline and not as a gospel. Nevertheless, in the benchmarking below you can undoubtedly find the overall best ones despite your needs.

Our dynamic platforms and specialist technology experts work hard to identify the best product choices. We strongly believe that our review benchmarking can help you simplify your purchase decision and choose among the absolute Best Mechanical Spur Gears (2021).

Best Mechanical Spur Gears

Best Choice No. 1
Boston Gear NA13B-5/16 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 20 Pitch, 0.313' Bore, 0.750' OD, 0..375' Face Width, 13 Teeth
Boston Gear NA13B-5/16 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 20 Pitch, 0.313″ Bore, 0.750″ OD, 0..375″ Face Width, 13 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
$28.93
Buy on Amazon
Best Choice No. 2
Martin S1618 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 16 Pitch, 1/2' Bore, 1.25' OD, 0.500' Face Width, 18 Teeth
Martin S1618 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 16 Pitch, 1/2″ Bore, 1.25″ OD, 0.500″ Face Width, 18 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • High carbon steel for tensile strength and hardness
$24.90
Buy on Amazon
Best Choice No. 3
Boston Gear Y4830 Spur Gear, Brass, Inch, 48 Pitch, 0.188' Bore, 0.667' OD, 0.125' Face Width, 30 Teeth
Boston Gear Y4830 Spur Gear, Brass, Inch, 48 Pitch, 0.188″ Bore, 0.667″ OD, 0.125″ Face Width, 30 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Diametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
$17.85
Buy on Amazon
Best Choice No. 4
Martin S2412 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 24 Pitch, 1/4' Bore, 0.583' OD, 0.250' Face Width, 12 Teeth
Martin S2412 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 24 Pitch, 1/4″ Bore, 0.583″ OD, 0.250″ Face Width, 12 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 24 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
  • High carbon steel for tensile strength and hardness
$13.99
Buy on Amazon
Best Choice No. 5
Boston Gear H3220 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 32 Pitch, 0.250' Bore, 0.687' OD, 0.188' Face Width, 20 Teeth
Boston Gear H3220 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 32 Pitch, 0.250″ Bore, 0.687″ OD, 0.188″ Face Width, 20 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 32 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
$20.50
Buy on Amazon
Best Choice No. 6
Boston Gear YD15 Spur Gear, Steel, Inch, 12 Pitch, 0.625' Bore, 1.417' OD, 1.000' Face Width, 15 Teeth
Boston Gear YD15 Spur Gear, Steel, Inch, 12 Pitch, 0.625″ Bore, 1.417″ OD, 1.000″ Face Width, 15 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Diametral pitch of 12 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
$13.98
Buy on Amazon
Best Choice No. 7
Boston Gear YPB2424 Spur Gear, Molded Delrin with Brass Inserts, Inch, 24 Pitch, 0.250' Bore, 1.083' OD, 0.250' Face Width, 24 Teeth
Boston Gear YPB2424 Spur Gear, Molded Delrin with Brass Inserts, Inch, 24 Pitch, 0.250″ Bore, 1.083″ OD, 0.250″ Face Width, 24 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Diametral pitch of 24 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
  • Molded polyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion combined with the corrosion resistance, ductility at high temperatures, and low magnetic permeability of brass
$3.02
Buy on Amazon
Best Choice No. 8
Boston Gear NA32 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 20 Pitch, 0.375' Bore, 1.700' OD, 0.375' Face Width, 32 Teeth
Boston Gear NA32 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 20 Pitch, 0.375″ Bore, 1.700″ OD, 0.375″ Face Width, 32 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
$23.60
Buy on Amazon
Best Choice No. 9
Boston Gear G228 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 16 Pitch, 0.250' Bore, 0.75' OD, 0.313' Face Width, 10 Teeth
Boston Gear G228 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 16 Pitch, 0.250″ Bore, 0.75″ OD, 0.313″ Face Width, 10 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
$14.83
Buy on Amazon
Best Choice No. 10
Boston Gear S2415 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 24 Pitch, 0.250' Bore, 0.708' OD, 0.250' Face Width, 15 Teeth
Boston Gear S2415 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 24 Pitch, 0.250″ Bore, 0.708″ OD, 0.250″ Face Width, 15 Teeth
  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
  • Diametral pitch of 24 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
$15.11
Buy on Amazon

If you have found our review analysis useful, please do not hesitate to subscribe for more amazing reviews. Bear in mind that our subscribers benefit from unique Amazon.com promo codes of up to 80% discount. That’s right, up to 80%! Do not miss them!.

You may also like…

Do not hesitate to share this review and spread the world! on Best Mechanical Spur Gears. We have simplified this for you to spread the world.