Best Commercial Grease Traps 2021

1,050,286 Reviews Analysed
545 Review Articles Examined

After deep searching of an insanely large number of articles and reviews by our dynamic AI and ML systems; and deep refining, evaluation and infiltration by our skillful hi-tech gurus, the golden shortlist for the Best Commercial Grease Traps (2021) is finally drafted.

The ultimate guide on Best Commercial Grease Traps produced using Deep Learning and Artificial Intelligence technology
Exclusively at AGR reviews

In order to obtain the Best Commercial Grease Traps (2021), our brilliant platforms and experts have taken many criteria into account such as product usability, features that meet consumers needs and give buyer satisfaction, defect-free, standards conformance, quality/price ratio, credibility, quality of design, quality conformance to needs and guidlines, protection and safety, actual buyer satisfaction and numerous others. It is of great importance to mention that each user has different requirements so please use the below shortlist as a guide and not as a gospel. Nevertheless, in the below benchmarking you can certainly find the overall best ones regardless of your needs.

Our smart platforms and competent technology gurus work hard to identify the best product options. We feel that our review evaluation can help you simplify your purchase decision and choose among the very Best Commercial Grease Traps (2021).

Best Commercial Grease Traps

Best Choice No. 1

XuSha Commercial Grease Trap 25lbs 13GPM Interceptor Stainless Steel for Restaurant Kitchen, Side Inlet

❤US Stock: You will get it within one week.【DIMENSION】- 24″ x 12″ x 11″ (L * W * H). Connection size (inlet & oulet): 1.77 Inches / 5 cm. Length of the threaded pipe: 78 cm / 30.4 Inches. Flowing speed up to 13 Gallons Per Minute (G.P.M.)
❤【MATERIAL】- Made of heavy duty 1.2 mm thickness stainless steel, which is strong and durable, anti-rust, anti-corrosion, not easily deformed. The removable filter basket can easily remove the collected residual waste. The threaded pipe is tightly installed with the grease trap, and the locking devices on both sides to prevent leakage.
❤【PRINCIPLE】- Waste water flows into the grease trap from the sink, the fats, oils and grease will rise to the surface and be collected between the baffles, and the solid particles will sink. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed.
❤【EASY TO INSTALL】- Connect the pipe run from the sinks and dishwasher to the Grease Trap inlet.Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school or small sink or dishwasher applications.
❤【PRECAUTIONS】- 1. When heating with electricity, water must be immersed in the heating device. 2. Select the oil-water separation device according to your own drainage volume. 3. At least 2-3 times a month to clean up the sediment, oil or sludge inside the water tank.

SaleBest Choice No. 2

John Boos GT-8 Carbon Steel Grease Interceptor, 14.2″ Long by 11.2″ Tall by 10.5″ Wide, 8 lbs Grease Capacity

This Grease trap has an 8 pound grease capacity and measures 14.2″ Long by 11.2″ Tall by 10.5″ Wide. It measures 2″ from top to pipe opening, 7.5″ from pipe opening to base
Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating
Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed.
T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic
This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute

Best Choice No. 3

XuanYue Commercial Grease Trap 25 LB 13GPM Gallon Per Minute Stainless Steel Grease Interceptor Kitchen Kit for Restaurant Factory and Home

One piece tank design, lightweight and compact, can eliminates seams and withstand continuous discharge.
Threaded pipe included, and it is closely fit with this grease trap to prevent potential leaking.
1.77 inch connection size inlet and outlet. Great for kitchen, restaurant, factory, school or small sink or dishwasher application.
The grease trap is made of heavy duty stainless steel, strong and durable, will not corrode, chip, or peel, not even under the most severe applications.
The trap can be installed in different places, in-floor, on-floor, or semi-recessed.

Best Choice No. 4

BK Resources BK-GT-20 Grease Trap, 20 LB. , 10GPM CAPACITY. Constructed of 11 gauge ca

Best Choice No. 5

AnEssOil Commercial Grease Trap Stainless Steel Interceptor 0.25 Ton/h (45x25x25cm)

【Overall dimensions】35x20x18cm/45x25x25cm/60x30x30cm;Weight: 5.5 lb (2.5 kg) / 10.1lb(4.6 kg) / 16lb/(7.3 kg) ；Material: Heavy Duty 0.6mm Thickness Stainless Steel
【High quality】Made of heavy duty 0.6mm thickness stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 0.15 / 0.25 /0.5 Ton/ H
【Easy to clean】Baffles are removable,Locking device at both side prevent side leakage of sewage. Faucet switch makes it easier to control the outlet of sewage. Lifting handle at the top allows easy transportation.
【Easy to install】 Our Grease Traps are delivered fully assembled and couldn’t be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor.
【100% Refund guarantee】We guarantee 3 year warranty, free parts exchanged, you can be sure to buy. If you are not completely satisfied with our products, we will give you a full refund.

Best Choice No. 6

WentWorth 70 Pound Grease Trap Interceptor 35 GPM Gallons Per Minute WP-GT-35

Powder Coated Gray – Corrosion Resistant
Heavy Duty 11 gauge Carbon Steel
4″ Inlet and outlet pipe

Best Choice No. 7

Grease Trap Interceptor Set,Lolicute Stainless Steel Grease Trap Interceptor Detachable Design For Restaurant Kitchen Wastewater Removable Baffles-USA Shipping

⭐The grease trap interceptor is suitable for the treatment of oily water of mineral oil, animal oil, vegetable oil, mixed oil and various emulsified oils with high-efficient oil-water separation effect.
⭐Mechanical gravity oil-water separator has compact structure. The interface connection is simple and the floor space is small.
⭐It can be arranged in the open air, or underground to prevent freezing. It has automatic shut-off device, oil drain device and sampling port.
⭐Easy to clean and maintain.Check the cleanliness of the corrugated board once a year. If it is dirty, just use a high-pressure water to clear it.
⭐AFTER SALE SERVICE:If you don’t like it for any reason or have any problem, please contact us at anytime,we will resolve any problem immediately.Replace it or refund you the full price as your request.

SaleBest Choice No. 8

Zurn GT2700-25-3NH – Grease Trap Interceptor, 3 In, 25 GPM

Recommended for removing and retaining grease from wastewater in kitchen and restaurant areas where food is prepared
Furnished with No-Hub inlet and outlet as standard connections
Corrosion-resistant, Dura-Coated steel body with slip resistant cover, flow diffusing baffle, integral trap, and external vented inlet flow control
Country of origin: United States

Best Choice No. 9

HYYKJ Grease Trap Stainless Steel Interceptor Set with Automatic Shut-off Device, Oil Drain Device and Sampling Port for Restaurant Factory Home Kitchen Commercial Use

【PREMIUM DEVICE】Our grease interceptor is made of high quality stainless steel, durable and long service life. It can be arranged in the open air, or underground to prevent freezing. It has automatic shut-off device, oil drain device and sampling port.
【MAIN PARAMETER】Material: stainless steel, Wastewater Inlet Diameter: 4.8cm / 1.9″, Water Outlet Diameter: 4.8cm / 1.9″, Grease Outlet Diameter: 2.2cm / 0.87″, Overall dimensions: 35cm x 25cm x 23cm (13.8” x 9.8” x 9”), Package dimensions: 41cm x 26cm x 25cm (16” x 10.2” x 9.8”), Package weight: 3.1kg / 6.8lbs.
【HUMANIZED DESIGN】Mechanical gravity oil-water separator has compact structure. The interface connection is simple and the floor space is small. Easy to clean.
【WIDE APPLICATION】This Grease Trap is suitable for the treatment of oily water of mineral oil, animal oil, vegetable oil, mixed oil and various emulsified oils with high-efficient oil-water separation effect.
【KINDLY NOTE】Check the cleanliness of the corrugated board once a year. If it is dirty, just use a high-pressure water to clear it.

Best Choice No. 10

WeChef Commercial 8lbs 5GPM Gallon Per Minute Stainless Steel Grease Trap Interceptor Under Sink Restaurant

Compact and durable 8 lbs grease trap, 5 Gallons per minute(G.P.M.)
Heavy Duty 1.2mm thickness stainless steel for preventing corrode, chip, or peel, even under the most severe applications
Detachable fine mesh filter for easy cleaning, the retained waste collected within the unit can be easily removed at regular
Easy to install with 2 inch connection
Weight: 12 lbs (5.45 kgs); Overall dimensions: 13″ L x 9-1/3″ W x 9-1/3″ H

If you have found our review rankings useful, please do not hesitate to subscribe for more stunning reviews. Bear in mind that our subscribers benefit from unique Amazon.com promo codes of up to 80% discount. That’s right, up to 80%! Do not miss out!.

Best Commercial Grease Traps 2021

1,050,286 Reviews Analysed545 Review Articles Examined

Best Commercial Grease Traps

You may also like…

Related Posts

Best Decorative Bowls 2021

Best Shelf Liners & Dividers 2021

Best Vanities & Vanity Benches 2021

Best Candy Thermometers & Timers 2021

1,050,286 Reviews Analysed
545 Review Articles Examined